본문 바로가기 대메뉴 바로가기
팝업열기
팝업 닫기

항공기술원

Certification

KIAST is committed to taking charge of and
ensuring aviation safety through aviation certification and inspections.

서브비쥬얼 이미지

Introduction

Aircraft Certification

KIAST conducts evaluation activities to ensure safety in the design and manufacturing of aircraft, engines, propellers, equipment, and parts.

Certification overview

인증개요
  • Design/Manufacturing
    • Type Certification
    • Production Certification
  • Operation
    • New : Airworthness Certification New : Airworthness Certification Recurrent : Airworthness Certification
  • Engine Propeller : Type -> Production Certification
    TSOA Article : Design Approval -> Production Approval
  • Replacement and Modification Parts
    • Engine
    • Propeller
    • TSOA Article
    • PMA part
    • Other approval parts
View larger image +

Domestic Products & Parts

NO.1TC(Type Certification)

A Type Certification (TC) is a design approval issued by the minister of MoLIT when the applicant demonstrates that a product complies with the applicable regulations and Korean Airworthiness Standards(KAS).

NO.2STC(Supplemental Type Certification)

A supplemental type certificate (STC) is a kinds of type certificate (TC) issued when an applicant demonstrates that change to a type design from aircraft, engine, or propeller’s its original design complies with the applicable regulations and Korean Airworthiness Standards(KAS). The STC, which incorporates by reference the related TC, approves not only the modification but also how that modification affects the original design.

NO.3TSOA(Technical Standard Order Authorization)

A TSO authorization is approval issued by the minister of MoLIT, when the applicant demonstrate compliance to applicable certification regulations and an applicant’s article meets the requirement of minimum performance standard. A TSO authorization includes design approval and production approval. In other words, a separate installation approval is required to install the TSO's article model on an aircraft to show that the article meets the specific airworthiness requirements (certification basis) of a particular aircraft model.

NO.4PMA(Parts Manufacturer Approval)

Parts Manufacturer Approval (PMA) is a combined design and production approval for modification and replacement articles. The PMA holder may produce and sell these articles for installation on type certificated products.

NO.5PC(Production Certification)

A production Certification is an approval (document) to manufacture duplicate products under an MoLIT-approved type design (i.e., type certificate or supplemental type certificate). To obtain one, the production application and approval process must be followed.

Certification for Imported Products and Parts

NO.1TCV(Type Certificates Validation)

Any foreign manufacturer, who intends to export a product to the Republic of Korea, which has been certified by a foreign authority, may obtain a type certificate validation from the Minister when the type design of product meets the Airworthiness Standards.

상단이동
Planning and Innovation Division/UAS Safety Division Robot Tower(16-18th floor)
Aviation Technology Division/Aviation Certification Division Robot R&D Center(1st-3rd floor), 155-30, Robot land-ro, Seo-gu, Incheon[22581]

Copyright (c) 2018 Korea Institute of Aviation Safety Technology. All Rights Reserved.